Sale Ended

SureCall

Flare 3.0

Sold Out
Login for Price

Product Description

Improve your cell signal for all US carriers inside any home, cabin, small building or office up to 3,000 square feet. Flare 3.0® takes the multi-award winning SureCall Flare model one step further to deliver even more cellular reliability to homes in remote areas.

Flare 3.0 comes kitted with a Yagi-directional antenna and an average 9 dB increase in uplink power for the frequencies that are most commonly used in rural areas. Together, the increased uplink and upgraded antenna pack the Flare 3.0 with 8X more connecting power for homes and offices in the most challenging signal locations.

Flare 3.0 has combined the booster and indoor antenna to streamline the system's design for easier installation and an attractive, low-profile appearance. The stylish one-piece base unit is designed to be placed on an open tabletop or shelf for clearer and more reliable voice and data performance.

Signal is delivered to the Flare 3.0 booster with the included outdoor Yagi antenna and 50 feet of premium RG-6 cable. The outdoor antenna captures signal from the cell tower and the all-carrier booster amplifies it and distributes the enhanced signal to all mobile devices within the booster’s coverage area. Flare 3.0 then amplifies outgoing signal back to the cell tower.

Product Details
  • ColorsSilver
  • Materials
    Plastic
  • Measurements
    20"L x 10"W x 10"H
  • OriginImported

— Warranty: Manufacturer's 3 Year
— Improves Cell Service for All US Carrier’s Voice, Text and 4G LTE Data Signals
— Increases Signal Strength & Extends Battery Life for Multiple Users on All Cellular Devices, up To 3,000 Sq Ft
— Significantly Improved Uplink Power and High-Gain Yagi Antenna for Best Performance in The Toughest Environments without Sacrificing Performance in Urban Locations
— Newly Added Gain Expands Indoor Cell Coverage for Those Located at The Edge of The Network
— Simple to Set up With All Components Included for A Light DIY Install
— Kit Contents: Flare 3.0 Indoor Booster, High-Gain Yagi Antenna with Mounting Hardware, Rg-6 Cable (50 Ft), Ac Power Supply, Quick Setup Guide

— Uplink Frequency Range (MHz): 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included)
— Downlink Frequency Range (MHz): 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included)
— Donor/Server Port Impedance: 75 Ohm / 50 Ohm
— Maximum Gain: 72 dB
— Noise Figure: 7 dB
— VSWR: ≤2.0
— Supported Standards: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO 4G LTE and all cellular standards
— AC Input: Input: AC 110 – 240 V, 60 Hz ; Output: DC 5V / 3A
— Maximum Output Power: 1 Watt EIRP
— Cable: RG-6 (50 ft)
— RF Connector: F-Female
— Power Consumption: <12W
— Weight: 1.81 lb
— No Subscription Services Or Monthly Fees

FAQ
Will the Flare 3.0 work for multiple cellular devises at the same time?

Yes, that's correct.

Is it a one time purchase?

Yes, this is a one time purchase product. You do not need a subscription for this product.

Does it work outside US with other carriers?

The Flare 3.0 only covers all the major carriers across North America.

Do you need an internet feed/connectivity for this to work?

This works strictly off over-the-air cellular signals provided by the cell tower, so there's no need for internet connectivity/feed to work.

I live in an apartment, can I dictate who can use the additional signal?

The signal should be contained to your apartment, but there is no control over which devices can or cannot benefit from the amplification of the signal that it provides.

Shipping Information
  • Shipping Availability
    United States
  • Shipping Policy
    Standard Ground Shipping
  • Ship In
    2-3 weeks
  • Return Policy
    Final sale, not eligible for return or cancellation

The sale has ended for this item, but check out our other amazing sales.
NEW SALES